A clever IKEA hack for this attic bedroom helped a DIYer avoid expensive custom built-ins

When space is limited you can almost always rely on IKEA for a piece of furniture that will fit. If a custom built-in style is what you're after, look no further than the PAX wardrobe - with this system the size, color and style are all decided by you. 

This clever IKEA hack goes one step further by using bespoke doors to fit a tiny storage space in the small nook of an attic bedroom, and we can't get enough of the finished result. 

Using a sheet of mdf and a lick of paint, this innovative storage solution is given a clean, seamless finish for an understated, built-in look. The clever hack, the handy work of home renovator Sophia Nikolaides (@1894home), makes use of all available floor space in this tiny attic conversion. Here she shares how she custom built her sliding storage space in just a few simple steps. 

(Image credit: Sophia Nikolaides (@1894home))

Sophia is no stranger to the PAX wardrobe. Over on her Instagram, where she shares the renovation of her Victorian home, the IKEA staple makes a regular appearance. 'We’ve used the IKEA PAX wardrobes in the other bedrooms in the house and made them look built-in by adding trim, cornice and skirting,' Sophia explains. 

In most cases though, the furniture extends floor to ceiling. In her upstairs attic bedroom, the sloped ceilings made it difficult to find furniture that would fit the awkward space; up here, floor to ceiling means something very different. In the corner of the room, an awkwardly shaped alcove meant the floorspace went unused, so Sophia decided to put her DIY skills to the test with a stylish built-in storage idea.

(Image credit: Sophia Nikolaides (@1894home))

'When we came to finding a solution to this awkward nook under our eaves, we decided to use the IKEA PAX again,' she explains. Before the frames of the unit were fitted, Sophia was tasked with measuring the space in order to cut them to size. 

'We cut the sides of the unit to fit under the slope and used the provided fixings to make it sturdy,' she says. 'Then it was a case of getting it in place for the doors.' 

For the trim and the two doors she used a sheet of mdf, sawing into the required shape and attaching it to the frame. 

(Image credit: Sophia Nikolaides (@1894home))

To keep the storage looking seamless with the rest of her space, Sophia opted for slab doors. 'The space feels quite busy with doors, windows and sloping roof, so I wanted to keep the wardrobes as minimal as possible,' she explains. 'To do this, we went with a plain slab door with a push opening.' 

She then used the same soft neutral color used on the walls to paint the door and trim of the built-in storage, adding to the smooth aesthetic. The end result is so inconspicuous, we're not sure we would have even noticed it if we hadn't known it was there!

'I'm super pleased with how it turned out,' says Sophia. 'All in all, the project cost  less than $230!' 

(Image credit: Sophia Nikolaides (@1894home))